MasterCAM X7下载 中文纯净版 最新!

daixingbei0701

版本运行环境: Windows 7 32位 或64位  和Windows 8 64位

【温馨提示】 如果您要查看本帖隐藏内容请回复


32位主程序下载:   

全站免回复看隐藏内容

http://updates.mastercam.com/X7/release/mastercamx7-x86-web.exe

32位破解 (含破解说明): http://pan.baidu.com/share/link?shareid=542513&uk=1258687182
         
X7 汉化32位:http://pan.baidu.com/share/link?shareid=542516&uk=1258687182


----------------------------------------------------------------------------------------------------------------------------------------------------------

64位主程序下载:  

全站免回复看隐藏内容

http://updates.mastercam.com/X7/release/mastercamx7-x64-web.exe

64位破解 (含破解说明):http://pan.baidu.com/share/link?shareid=539074&uk=1258687182

897474201@qq.co

ATTENTION!
If you already have USB-Emulator for MC X4-X5 (HASP or NetHASP)  installed you can skip steps 1) - 5) and need only to run "mastercam_X5_crk.exe"

1) Unpack a folders "USB-Emul_Win64" and  "remove_old_emuls"  to your computer

2) Run "remove_old_emuls\delete_old_emuls.bat"  to CLEAR a Windows Registry from "blacklisted" Emulators

3) Run "mcamX4_MU3-dealer-nethasp.reg" or "mcamX4_MU3-industrial-nethasp.reg" (dealer dump has got extended functionality!) if you want to install Mastercam X5 with NetHASP SIM type.
        or
run "mcamX4_MU3-dealer_hasp.reg" if you want to install Mastercam X5 with HASP SIM type.


4) Install a USB-Win64 Emulator

You need a local Administrator rights to install this emulator for Win64!
On Windows Vista64 and Windows7 64-bit you need to boot Windows in mode F8 > Desable Unsigned Drivers Enforcment !!!

4.1. Reboot computer (for Windows Vista64 and Windows7 64-bit you need to boot Windows in mode F8 > Desable Unsigned Drivers Enforcment !!!)
4.2.   Install usb-emulator drivers
  Start ->  Control Panel -> Add Hardware (Yes, I have already connected the hardware) -> Add a new hardware device -> Install the hardware that I manually select from a list -> Show all Devices -> Have disk -> Browse -> (browse to folder "USB-Emul_Win64") -> OK -> Confirm to install not certificated drivers if Windows ask for..

If setup is succesfull you have to see new system device:
Device Manager -> System devices -> Virtual Usb Bus Enumerator


5)  Install MC X5 as HASP or NetHASP SIM type.

6) Copy Mastercam.exe from crack to <Mastercam X6 progdir> and replace original one

7) Enjoy

tumu

撒旦法阿斯蒂芬撒旦法诗圣杜甫阿斯蒂芬阿萨德发送到发生大幅撒        钱钱钱钱钱钱钱钱钱钱钱钱钱钱钱钱呜呜呜呜呜呜呜呜呜呜呜呜呜呜呜呜呜呜呜呜呜噩噩噩噩噩噩噩噩噩噩噩噩噩噩噩噩噩噩噩噩日日日日日日日日日日日日日日日日日日日日日日

as0976413826

RE: MasterCAM X7下载 中文纯净版 最新! [修改]
RE: MasterCAM X7下载 中文纯净版 最新! [修改]
RE: MasterCAM X7下载 中文纯净版 最新! [修改]
RE: MasterCAM X7下载 中文纯净版 最新! [修改]
RE: MasterCAM X7下载 中文纯净版 最新! [修改]

lp649454510

沙发........

lp649454510

弱弱的问一声64位的汉化呢？

zhutou

没见到64汉化文件哦

lp649454510

mastercamx7-x64 安装完了64位，破解也正常完成，电脑也重新启动按了F8"禁用驱动程序签名强制"的，打开软件时无法运行，打开报警“无法定位程序输入点？is_chook@@YADPEBD@Z于动态链接库Mastercam.exe上。

ENDM99

汉化呢怎么没有看到？

凌晨3点半

不错，又占了一个沙发！

lqf999999

有没有繁体版

Jella

谢谢楼主了，顶一下

jmxingzai

64位汉化呢怎么没有看到？