优胜UG通用后处理怎么设置每行输出";"
新代系统宏程序每行都要输出; 怎么设置呢？记事本打开YSUG3.def，如下块加Text[;]1. 直线移动块
BLOCK_TEMPLATE linear_move
{
G_cutcom[$mom_sys_cutcom_code($mom_cutcom_status)]\opt
G_plane[$mom_sys_cutcom_plane_code($mom_cutcom_plane)]\opt
G_motion[$mom_sys_linear_code]
G_mode[$mom_sys_output_code(ABSOLUTE)]\opt
X[$mom_pos(0)*$bb]
Y[$mom_pos(1)*$aa]
Z[$mom_pos(2)]
D[$mom_cutcom_adjust_register]\opt
F[$feed]
Text[;]
}
2. 圆弧移动块
BLOCK_TEMPLATE circular_move
{
G_plane[$mom_sys_cutcom_plane_code($mom_pos_arc_plane)]\opt
G_motion[$mom_sys_circle_code($mom_arc_direction)]\opt
G_mode[$mom_sys_output_code($mom_output_mode)]\opt
X[$mom_pos(0)]
Y[$mom_pos(1)]
Z[$mom_pos(2)]
I[$mom_pos_arc_center(0) - $mom_prev_pos(0)]
J[$mom_pos_arc_center(1) - $mom_prev_pos(1)]
K[$mom_pos_arc_center(2) - $mom_prev_pos(2)]
F[$feed]
Text[;]
}
3. XY快速移动
BLOCK_TEMPLATE rapid_traverse_xy
{
G_cutcom[$mom_sys_cutcom_code($mom_cutcom_status)]\opt
G_plane[$mom_sys_cutcom_plane_code($mom_cutcom_plane)]\opt
G_motion[$mom_sys_rapid_code]
G_mode[$mom_sys_output_code(ABSOLUTE)]\opt
X[$mom_pos(0)]
Y[$mom_pos(1)]
Text[;]
}
4. Z快速移动
BLOCK_TEMPLATE rapid_spindle_z
{
G_motion[$mom_sys_rapid_code]
Z[$mom_pos(2)]
Text[;]
}
5. 初始移动块
BLOCK_TEMPLATE initial_move_G00
BLOCK_TEMPLATE initial_move_G00_M08
BLOCK_TEMPLATE initial_move_G01
BLOCK_TEMPLATE initial_move_G01_M08
BLOCK_TEMPLATE initial_move_G43ZH
BLOCK_TEMPLATE initial_move_G43ZH_M08
6. 固定循环块
BLOCK_TEMPLATE cycle_tap
.....
页:
[1]