优胜PM3通用后处理程序头自定义设置！
一、要求设置为如下格式二、默认设置为
L11："( " + $Toolpath_Name+ " )"
L12："( TNAME:"+$Tool_Name+" L:"+$Tool_Overhang+"/"+$Tool_Cutting_Length+" )"
L13："( STOCK:"+$Thickness+"/"+$Axial_Thickness+" )"
三、自定义设置如下
L11："(NAME：" + $Toolpath_Name + ")"
L12："(Tool= " + $Tool_Name + ")"
L13："(D=" + $Tool_Diameter + " R=" + $Tool_Tip_Radius + " L=" + $Tool_Overhang + ")"
四、优胜PM3-4-5轴通用后处理下载
https://www.mjzl.cn/thread-625335-1-1.html
页:
[1]